Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases, at no extra cost to you. We research rather than test, and commissions never change our rankings. This site is reader-supported: those commissions pay for hosting, research and keeping every guide up to date, so if a guide helped you, buying through our links is an easy way to support it. How we rank · Full disclosure
TL;DR
- Drawer systems give sorted storage under a flat deck; DECKED's full-size unit is rated 2,000 lb on the deck and 200 lb per drawer.
- They are heavy: about 208–233 lb for DECKED's full-size system, and that comes out of the truck's payload.
- A 12.2-in drawer system fills over half the depth of a 21.4-in F-150 bed, so check tonneau-cover clearance first.
- Slide-out trays keep one floor and roll it past the tailgate; DECKED's CargoGlide extends 75% and is rated from 600 to 2,200 lb.
- If you need one locked spot for tools, a bed toolbox (DECKED's is rated 800 lb in the tub) leaves the rest of the floor open.
Best for An owner who wants a full organized-storage system with a flat usable top, not just a bin or tray.
- HDPE drawers on a galvanized steel frame per the manufacturer's technical specs.
- 2,000 lb evenly distributed payload rating on full-size trucks, 200 lb per drawer.
- Keeps the bed floor flat and usable on top of the drawers.
Best for An owner who wants easier access to heavy cargo at the back of a deep bed without climbing in.
- Slide-out tray design listed for 5'7"+ beds.
- Heavy-duty polyethylene construction per the listing.
- Brings cargo to the tailgate instead of requiring a reach into the bed.
Best for A lower-cost, lighter-duty slide-out option for short-bed trucks.
- Universal fit listed for short beds 5'6" and up.
- Slide-out mat design for tailgate-side cargo access.
- Lighter-duty alternative to a full drawer system.
Best for An owner who wants a self-contained box-and-slider combination rather than a full-bed drawer system.
- 48-inch slider storage loader system per the listing.
- Self-contained box unit rather than a full-bed built-in drawer.
- Sized for a portion of the bed rather than the full length.
Best for An owner who wants a standalone lockable toolbox rather than a full bed-organizing system.
- Diamond plate aluminum construction with a side handle per the listing.
- Standalone toolbox rather than an integrated full-bed system.
- Suits an owner adding one dedicated tool storage point rather than reorganizing the whole bed.
Confirm with the seller for your exact year/trim and bed length before ordering.
The Main Organizer Types
| Type | What it does | Example published specs (DECKED) |
|---|---|---|
| Drawer system | Two long drawers under a flat deck across the full bed | Full-size: 2,000 lb on deck, 200 lb per drawer, 12.2 in tall, ~208–233 lb |
| Slide-out tray | A rolling floor that extends past the tailgate | CargoGlide: 600 to 2,200 lb ratings, 75% extension, 128–204 lb |
| Bed tool box | One lockable box, usually at the front of the bed | 300 lb on the lid, 800 lb in the tub, 106 lb |
| Slide-out mat or cargo box | A lighter sliding surface or box for part of the bed | Varies by listing; check for a rating |
These are DECKED's own figures from its technical specifications, used here because it publishes them in full; most organizer listings don't.
Drawer Systems: What the Numbers Mean
DECKED builds its drawer systems from high-density polyethylene on a galvanized steel frame with stainless hardware. The full-size truck unit measures 65 in long for short beds and 75 in for standard and 8-ft beds, 71.6 in wide and 12.2 in tall. Each drawer is 18.4 in wide; the short-bed drawers hold 158 L and pull out 43 in, the standard-bed drawers 186 L and 54 in. The midsize version is rated for 1,000 lb on the deck and uses one wide "mega drawer" instead of two. The two ratings do different jobs: the deck rating is for load spread across the top, and the drawer rating limits what goes inside each drawer.
How It Fits the Bed
An organizer has to clear the wheel wells and leave room for the tailgate to close. Ford's 2026 F-150 specifications give the numbers for one truck: 50.6 in between the wheelhouses, 21.4 in of depth at the rail molding, and floor lengths of 67.1, 78.9 and 97.6 in for the three boxes. A 12.2-in drawer system therefore takes more than half the bed's depth, and whatever sits on its deck gains that much height too. DECKED also lists the width its drawers need in order to function, 46 in on the full-size and van systems, a figure to check against your own bed before ordering.
Slide-Out Trays
A tray keeps a single flat floor but rolls it toward you, so heavy cargo at the front of the bed doesn't need climbing in for. DECKED's CargoGlide uses a powder-coated steel frame, a 0.75-in plywood deck with a thermoplastic top sheet and aluminum sidewalls, extends 75% of its length, and comes in 600, 1,000, 1,500 and 2,200 lb ratings. A tray's rating can change with how it's mounted: DECKED lists one 1,500-lb model at 869 lb when mounted on top of a drawer system.
When a Single Toolbox Is Enough
If you only need one locked spot for tools or recovery gear, a toolbox leaves the rest of the floor open. DECKED's bed tool box is 71.7 in long and 25.5 in wide, holds 288 L, and is rated for 300 lb on the lid and 800 lb in the tub. If you camp in the bed, Napier says its truck tents can go over a bed toolbox, with the box's corners padded so they don't tear the tent, though you lose that floor space.
Payload: A Worked Example
Federal rules (49 CFR 575.6) set out the method: take the "combined weight of occupants and cargo should never exceed" figure on the tire and loading placard, subtract the people, and the rest is cargo capacity. With a 1,400-lb placard figure, two 180-lb occupants and DECKED's 233-lb standard-bed drawer system, 1,400 − 360 − 233 = 807 lb remain for everything in the drawers and on the deck. The organizer's own rating can't raise that number; the truck's placard sets the ceiling.
Tonneau Cover Compatibility
Most organizers sit under a tonneau cover, but the space is tight. On an F-150, a 12.2-in drawer system under a flush cover leaves roughly 9 in above the deck, and a retractable cover's canister sits at the front of the bed, where a drawer system also begins. Check the cover maker's clearance and canister depth against the organizer's height and length; see the best tonneau covers guide and our DECKED drawer system review.
How We Rank Truck Bed Organizers
These picks are ranked from aggregated owner reviews and each maker's listed capacity, material and mounting details. We don't buy or fit this gear ourselves. See how we rank and our affiliate disclosure.
Sources
- DECKED — Technical Specs — Drawer systems (2,000 lb deck / 200 lb per drawer full-size; 1,000 lb midsize), dimensions and weights (~208–233 lb), CargoGlide ratings and weights, and tool box ratings (300 lb lid, 800 lb tub, 106 lb).
- Ford — 2026 F-150 Technical Specifications — F-150 box inside lengths at the floor (5.5-ft 67.1 in, 6.5-ft 78.9 in, 8-ft 97.6 in), 50.6 in between wheelhouses, 21.4 in depth at the rail molding and box volumes.
- 49 CFR 571.110 — FMVSS 110, tire and loading information placard (Cornell LII) — Requires the placard stating the combined weight of occupants and cargo the vehicle should never exceed.
- 49 CFR 575.6 — Steps for determining correct load limit (Cornell LII) — Method for subtracting occupant weight from the placard's occupant-and-cargo limit to find cargo capacity (its worked example uses a 1,400-lb limit).
- Napier Outdoors — Backroadz Truck Tent — Size ranges by bed length, specs (2 people, 5 ft center height, 15–16 lb, 1500mm PU coating, taped-seam rainfly), setup times, and fit with roll-up covers (under 6 in), rails (under 3 in), toolboxes and caps; don't drive with it set up.